Novedades en el Mercado B2B
En este caso toca hablar de la ref.1184. Se trata de una broca extra larga con la que se pueden llegar a taladrar profundidades de hasta 12xD. Esta broca, al igual que el resto que forman la gama, está fabricada en metal duro micrograno <0,7micras, con canales de refrigeración interna y recubrimiento de TiAlN de última generación.
En esta referencia y en la ya existente para hasta 8xD (ref.1178), la gama cubre desde diámetro 3 hasta 16mm, mientras que en las referencias para hasta 3xD (ref.1175 y 1176) y 5xD (ref.117), se llega hasta 20mm.
Con esta última incorporacion, Hepyc completa una amplia gama en brocas cilindricas de metal duro, todas ellas recomendadas para trabajar varios tipos de materiales, tales como como Aceros de alta resistencoia, Aceros Inoxidables,fundición o Aleaciones de Titanio y superaleaciones, ofreciendo máximos rendimientos y tiempos de ciclo muy reducidos.
EN 2018, JUNTO CON TECNALIA, SE INICIÓ EL PROYECTO DE MICROCORTE CON AYUDA DEL CDTI (Centro para el Desarrollo Tecnológico Industrial)
EN JUNIO DE 2020 EL PROYECTO HA LLEGADO A SU CONCLUSIÓN
oct 20 2020
Fecha: 20 de octubre de 2020 05:43 AM
Highnoon optical held the ABBA brand online Business Meeting in October 2020. Face-to-face meetings became impossible due to Corona 19, and in response to this, the ABBA brand was widely publicized in Turkey, and boldly advanced to develop a customer market.
In the past, products were introduced by going on business trips overseas or by a buyer visiting Korea to see and wear ABBA products. However, considering the difficulty of direct visits (face-to-face activities) due to Corona 19, the product was introduced by replacing it online.
Foreign countries have preferred Chinese-made frames since the past, but because of the high defect rate, they searched for other products. During a video conference with Turkey, the most inquiries about products manufactured and produced in Korea were.
In addition, various inquiries and consultations came and went. Highnoon Optical introduced its products under the slogan of 'cost performance' (short for 'price/performance') and at the same time showed its brand value with its third-generation business experience. As a result, online marketing ended successfully.
oct 11 2020
Fecha: 11 de octubre de 2020 10:00 AM
One of the main reasons for that is to have developed integrated production systems for the three companies of the PCB Division: Cistelaier in Italy, Techci-Rhône-Alpes in France and EPN Electroprint in Germany.
The aim of this integration process is to make the production systems of the three companies of the PCB Division more and more capable to interact and to replace each other, so that each one of them could offer its own production capacity completing and integrating the one of the others.
In Techci, this integration process has started in 2011 when Finmasi Group acquired it.
Since then, between the Italian plants of Cistelaier and the French plant of Techci has started an accurate technical evaluation and a deep exchange of experiences and technology knowledge.
Harmonic development logics has been carried out, such as base material’s standardization – the chemistry for production included, which is really important in PCBs manufacturing – and technologies's and machinery’s standardization.
The aim was, and still is, to get the best of each company of the PCB Division and to implement it at the PCB Division level so to make it a standard for the PCB Division itself.
This process has allowed enhancing Cistelaier’s and Techci’s best practices maximising the overall results of the PCB Division.
Today the development of the PCB Division is continuing also with EPN Electroprint, a German PCB manufacturer based in Neustadt (Thuringia region) acquired by Finmasi Group in January 2019.
Only after a few months from the acquisition, EPN already qualified and adopted the same preferential materials of the PCB Division, the same chemistry for production and often also the same machineries.
Finmasi Group’s PCB Division integration continues, sure that this logic represents a concrete asset.
Integration activities very similar to those implemented throughout the companies of the PCB Division, have been developed and continue to be subject to improvement also with our Chinese partners for PCB manufacturing.
Indeed, the PCB Division takes advantage of the cooperation of the best Chinese manufacturers to complete its offer, especially for high volumes batches.
This integration allows to offer to our Customers a support wider than that which each one of the companies of the PCB Division could deliver by its own.
This is important, for example, when a higher production capacity is needed, as a result of an order income higher than the forecasted one or when a production breakdown occurs in one of the plants of the PCB Division.
Risk analysis and management are fundamental activities for leading companies in their own market sector such as those of the Finmasi Group’s PCB Division.
www.cistelaier.com - www.techci.fr - www.epn.de